|
Learn to Sew Ghost
|
Materials:
2) Being careful to line up both ghosts evenly, pin them together with the two large safety pins*. 3) Using the hole punch, make holes around the outside edge of the ghost thru both layers approximately 1/4" in from the edge and ½" apart. 4) Thread the yarn needle with white yarn and knot one end. To start so the knot won't pull thru, from between the 2 layers of the ghost come up between 2 sets of the punched holes. 5) Using the holes, hand sew with an over edge stitch (Come up from the bottom into one of the holes then bring your needle up from the bottom again into the very next hole.) 6) Stop sewing when you have about 2 ½" left to sew. I find it helpful to take the needle off the yarn while stuffing your ghost so it doesn’t fall off and get lost. 7) Lightly stuff your ghost being sure to spread the stuffing into the head, arms and bottom point. 8) Re-thread your needle and resume sewing. 9) When you finish sewing, knot the yarn and take a couple more stitches before cutting the yarn. (This helps hide the end of the yarn.) 10) Put a little blush on your ghost where the checks will be.
11) Glue on the eyes and draw a mouth with the permanent
marker.
|
![]() |
![]() |