|
2) Punch a hole at the top of the tree with a
hole punch. A 3/16" hole punch works best.
3) To attach a hanger, cut a 6" piece of
yarn, elastic thread or thin ribbon. Fold
it in half and put the folded end through the
hole you punched. Then, put the two loose
ends through the loop and gently pull the ends.
Tie the two loose ends together in an overhand
knot.
4) Cut a star from yellow craft foam and glue
it to the top of the tree. It is ok to
glue it on top of the hole you punched
5) Apply a line of glue in a back and forth
pattern on the front side of the tree.
Cover the glue with glitter. See our
hints & tips page for hints on working with
glitter. If you have glitter glue, you
could use it instead of separate glue and
glitter.
6) Glue on star confetti and/or sequins.
When doing this, it is easiest to put dots of
white glue on the tree then place the confetti
or sequins on top of the dots of glue.
This is much easier than trying to put the glue
directly on the confetti.
Printable instructions
Back to Ornaments
|
Craft
Elf Blog
Craft
Elf Facebook
Craft
Elf Twitter
Green
Craft foam; 5 1/2" x 4 1/2"