|
3) Put a 1 ½" piece of 2 sided tape on both sides of a wooden
clothes pin (nearest the closed end)
4) Peel the paper off one of the pieces of 2 sided tape and
carefully centering it, attach it to the center of one of the
bats with the closed end closest to the head of the bat.
5) Repeat step 4 with the other bat being sure to have both bats
lined up evenly.
6) Cut 2 small pieces of 2 sided tape and place one inside of
each set of wings to hold them together
7) Glue 2 eyes on each side of bat.
8) Optional - spread glue on entire bat or just along edges and
sprinkle with glitter*.
9) Clip bats around the house for a hauntingly wonderful
Halloween!
*See free hints and tips section for suggestions
when using glitter.
Bat Magnet
Materials:
- 1 sheet Black Craft Foam
- 1" strip of magnet
- Two - 7mm googly eyes
- all purpose or craft glue
- Optional - clear or black glitter
1) Trace and cut out one bat from black craft
foam.
2) Attach magnet to back.
3) Glue 2 eyes on front of bat
4) Optional - spread glue on entire bat or just
along edges and sprinkle with glitter.
Printable
instructions & pattern
Back Halloween |
Craft
Elf Blog
Craft
Elf Facebook
Craft
Elf Twitter