Materials:
- Thin plastic headband
- Stiff white felt*; 1 sheet
- Pink felt*; 6" sq
- Purple and white ribbon 1/4" to 1/8"
wide
- Hot glue gun
*Craft foam can be used in place of felt if
desired.
|
-
Attach
the purple ribbon to one of the inside ends
of he headband with hot glue.
- Wrap the ribbon around the headband.
When you get to the other end, glue the
ribbon to the inside edge. Cut off any
extra ribbon.
- Trace and cut out two ears from the
stiff white felt. The felt we used had
glitter on it but that is optional.
- Lay one of the ears right side down on
your work surface. Lay the headband on
top of the ear so that the edge of the ear
is close to the center of the headband.
Fold the bottom of the ear up and over the
headband and glue in place as pictured.
- Repeat step #4 with the second ear.
- Trace and cut out two centers from the
pink felt.
- Glue the centers to the front side of
the ears using white glue or hot glue.
- Cut a 2" piece of white ribbon and place
it on your work surface. Holding the
white and purple ribbons together as one,
wrap it around four of your fingers three
times. Slide the lops off your fingers
and tie the center of the loops securely
with the 2" piece of ribbon you cut earlier.
Repeat to make a second bow.
- Glue one bow at the base of each ear
with hot glue.
Printable instructions
Back Easter |
|